▷ HOME > PRODUCT > DSP Development > Development Tools > P/N:D.00000039

DSP Development (54)
XDS220 ISO-702332

XDS220 ISO USB/Ethernet JTAG Emulator with galvanic isolation

The XDS200 is a compact and powerful JTAG in-circuit emulator for Texas Instruments processors. Its performance is rated between the low-cost XDS100 and the high performance XDS560 emulators.
The galvanic isolation allows safe handling in high-voltage environments like power electronics, motor control, and inverters.
The XDS220 is connected to the host PC either by a USB2.0 port or via Ethernet. In USB mode no additional power supply is needed, for Ethernet operation a power supply is included.
CTI-20, 14-pin TI-JTAG, 10-pin ARM, and 20-pin ARM headers are provided to connect the target device.
≫ USB 2.0 high-speed interface
≫ Ethernet Host Interface
≫ USB bus-powered, no external power supply needed in USB mode
≫ Power supply for Ethernet mode included
≫ 20-pin CTI, 10-pin ARM, 20-pin ARM, and 14-pin TI JTAG Headers
≫ Supported by Code Composer Studio, revision 5.2 and higher
≫ Supports all current TI DSP, ARM, Stellaris, DaVinci and OMAP processors
≫ 1.2 to 4.1V target IO voltage
≫ Isolation according to IEC 60647-5-2 / VDE 0884, Rev 2: 4000Vpk VIOTM, 560Vpk VIORM
≫ Certified UL 1577, IEC 61010-1, IEC 60950-1 and CSA
≫ ETB Trace Buffer support on compatible processors
≫ ARM Single Wire Debug (SWD) and ARM Single Wire Output (SWO) support
≫ IEEE 1149.7 CJTAG
≫ size 41,3 x 20,3 mm
≫ 89mm JTAG cable
≫ USB and Ethernet cable
Technical Information
Ordering Information
≫ 702332 XDS220 ISO Emulator
More Information
Related Product

VP : T2814D1, Last updated :2018-02-15 22:10:03